Kvant Burstberry Cluster | Distributor

A pack made of six Burstberries offers more than 150.000 points-per-second drawing capability - that's at 8 degrees projection angle and 20 frames per second performed. And being virtually a single unit makes the handling extremely easy and practical because you don't have to worry about the misalignment between the projectors once they are set up - even if moved afterwards.

Just imagine what you could do with over 150.000 points per second; how complex the content could be with absolutely no flicker when projected. The Burstberry offers endless creative possibilities and easy control when designing challenging laser effects. Because it is intended to be operated mainly via Artnet or DMX, we see it ultimately as the product of choice for every lighting designer.

Unmatched!

One of the key features that a cluster of Burstberries will give its user is phenomenal graphical performance.

What's in the package?

Kvant Burstberry laser show projector Six Burstberry projectors
Kvant Burstberry laser hanging bracket Hanging brackets
Heavy duty laser flight case Heavy-duty flight case
mains power cable for laser Mains cable
Ethernet cable included with laser projector Ethernet cable
Yellow safety estop E-stop with XLR cable
Safety interlock for laser projector Interlock [US only]
Safety keys for kvant laser projector Safety keys
Kvant USB flash drive USB drive with manual
Laser QC certificate for authentication  QC certificate

Accessories

Kvant burstberry laser spacer/connector plate
Burstberry Spacer/Connector [2 pc] A metal plate for spacing Burstberry laser projectors further apart. Learn more
Kvant e-stop splitter 12 DMX
E-STOP Splitter 12 E-STOP signal distribution interface - 2x IN | 12x OUT. Learn more
MicroWheel Grating set A special effect for the main aperture of BeamBrush, Burtsberry and Clubmax. Learn more
safety scan lens bracket for kvant laser projectors
Safety Scan Lens bracket It's for fitting and adjusting SafetyScan lenses to all compatible KVANT lasers. Learn more

Specifications

Source | Type:
Semiconductor laser diode | Full-colour RGB laser projector/Lighting fixture
Suitability: Indoor/outdoor laser displays [atmospheric, abstract, text, animations]
System control: FB4-STD [Ethernet, ArtNet | PC, Lighting Console or Autoplay]
Compliant with:
EN 60825-1 [tested by TÜV SÜD], FDA
Weight [kg]: 23
Size [WxHxD, mm]:
approx. 520 x 350x 359 [Technical Drawings are in the SUPPORT section of this page]
Guaranteed opt. output [W]: 12
R | G | B [W]:
0.37 | 0.8 | 1.2 [*see note A below]
Wavelengths [nm, ±5nm]:
637 | 525 | 445
Beam size [mm]: 5.2 x 5.5
Beam divergence [mrad]:
0.7 [full angle, averaged value, *see note B below]
Modulation [kHz] | type: 100 | analogue
X-Y scanners:
ScannerMAX 506 Compact | 168 Kpps @ 8°, max. 60° [per 6-unit cluster]
Power requirements [V] | Input:
100-230/50-60Hz | Neutrik powerCON TRUE1
Max. power consumption [VA]: 340 [each sub-unit]
Operation temperature [°C]: 10-35
Included in the set:
Heavy-duty fligh case, 1.5M power lead, 1M AC jumper cables, 10M Ethernet rj45 signal cable, 1M Ethernet rj45 signal cables, E-STOP remote with 10M 3-pin XLR cable, 1M 3-pin XLR cables, safety keys, interlock connectors [for the USA only], USB memory stick with the user manual, QC certificates. Pangolin QuickShow laser control and creation software is available for FREE download.
HW features:
All the basic system settings and adjustments such as power output adjustment for each colour, X & Y axes invert, X & Y size and position, etc. are managed via the software and built-in FB4 control interface.
Scanning system overload protection.
Star-burst laser effect [2nd aperture].
3W white LED blinder.
Laser safety features:
Keyed interlock, emission delay, magnetic interlock, scan-fail safety, fast electromechanical shutter [reaction time <20ms], adjustable aperture masking plate, Emergency STOP system with keyed remote and manual RESTART button.
note A
Due to Advanced Optical Correction technology used in Kvant systems, the real power output of each laser module installed within the system may slightly differ from its specification. This doesn't affect the total guaranteed power output of the system.
note B The beam divergence total is calculated as an average arithmetic value of all individual colours. The divergence of each colour is calculated as:
1. FWHM of the beam cross-section for round beams, or
2. The arithmetic average of the beam's horizontal and vertical divergence for all rectangular beams.